AMI UCFL214-43C4HR23 Flange Block Bearings

H1:19 mm; B:42.9 mm; s1:21.45 mm; H:47.6 mm; Designation of bearing:UC207-22G2T04; T max.:100 °C; A:45 mm; Recommended tightening torque for set screw:8 Nm; d:34.92 mm; C:25.7 kN;

Holder Surface Treatment:Clear Anodize; Number of Bearings:Double; Bearing Part Number:6001; Seals:ZZ (Double Shield); Width T(mm):25; Bearing Material:Stainless Steel; Volume Discount:Available; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type;

r - Cup Backface To Clear Radius2:3.30 mm; d:124.943 mm; db - Cone Backface Backing Diameter:151.89 mm; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)5:141000 lbf; Aa - Cage-Cone Backface Clearance:5.6 mm; G1 - Heat Generation Factor (Roller-Raceway):453.9; Ca90 - Dynami

Nref:9,000 rpm; Nlim:13,000 rpm; Db min:98 mm; Characteristic cage frequency, FTF:0.38 Hz; Da max:82 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Brand:SNR; d:40 mm; Radial clearance class:C3; a min:3.07 mm;

E:7.063 in; Major Diameter d:5.888 in; H:0.291 in; G:0.610 in; D:0.979 in; Weight:4.75 lb; Threads No. per Inch:12; C:7.693 in;

db - Cone Backface Backing Diameter:2.76 in; Ab - Cage-Cone Frontface Clearance:0.11 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3810 lbf; Cg - Geometry Factor12:0.0859; Da - Cup Frontface Backing Diameter:3.68 in; Cup Part Number:384D; Y2 - ISO Factor10:2.84; C1 - Dynamic Radial Rati

G1 - Heat Generation Factor (Roller-Raceway):2732.7; Cg - Geometry Factor:0.183; B:66.675 mm; R - Cone Backface To Clear Radius1:8.380 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:39200 lbf; K - Factor7:1.66; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)5:25

Inner/Outer Ring Material:[Steel] Steel; Combination symbol:No; Basic Load Rating, Static Rating(N):107000; Specifications, Environment:Standard; Spacer, Sleeve symbol:No; Basic Dynamic Load Rating Cr(N):143000; Number of Raceway Ring Rows:Single Row; Bearing Style:Open Type; Retainer Type:Punching;

Brand:SNR; Characteristic rolling element frequency, BSF:8.37 Hz; Y1:2.95; Y2:4.4; b:14.3 mm; Characteristic cage frequency, FTF:0.44 Hz; Characteristic inner ring frequency, BPFI:13.4 Hz; D:310 mm; rs min:2.1 mm; k:7 mm;

Aa - Cage-Cone Backface Clearance:0.8 mm; B - Cone Width:29.997 mm; r - Cup Backface To Clear Radius2:3.30 mm; Cone Part Number:3199; da - Cone Frontface Backing Diameter:39.62 mm; Cage Type:Stamped Steel; K - Factor7:1.76; a - Effective Center Location3:-10.2 mm; Bearing Weight:0.6 Kg; db - Cone Ba

Roller O.D. D(Ø):35; Days to Ship:12 Days; Category:Roller Follower; Material:Carbon Steel; Roller Width B(mm):19; Basic Load Rating, Static Rating(kN):25.7; Shaft:No; Roller Follower Type:Double Cylindrical R; Roller Follower Type:Double Cylindrical R; Unit:Metric System;

Type:Bearings with Housin; Bearing Retained:No; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):50 ～ 65; Number of Bearings:Double; Flange Shape:Compact Type; Bearing Part Number:6202; Shape:Flanged Pilot Type; Flange O.D. H(φ):66;

T max.:100 °C; S:22.2 mm; T min.:-20 °C; Weight:1.27 kg; Designation of bearing:UC211-32G2L3; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm; d:50.8 mm; C0:29.2 kN; B:55.6 mm;

C0:11.5 kN; d:30 mm; m:5 mm; SW:3 mm; B:38.1 mm; G:M6x1; r:0.5; S:15.9 mm; C1:5 mm; D:62 mm;

Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Days to Ship:7 Days; Type:Bearings with Housin; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Flange Shape:Square Type; Volume Discount:Available; Shape:Flange Type;